Bromic Heating - BH3130010-2 - Controls - On/Off Switch for Smart-Heat Electric and Gas Heaters with Wireless Remote

The Bromic Heating Wireless Controller has the ability to switch power supply to two separate circuits, enabling independent On/Off control of single element heaters, Hi/Lo control of dual element heaters or On/Off control of up to four gas heaters.

The units included radio transmitter offers control from up to 100ft away and is entirely portable.

Installation Requirements

• Must be mounted vertically on wall.
• Installed in a well ventilated area.
• Must be in a covered area protected from weather.
• Needs 12 Inches of clearance in all directions and must be 3 feet from heater.

Heaters Per Control

• (2) X 2,000W
• (2) X 2,300W
• (2) X 3,000W
• (2) X 3,400W
• (1) X 4,000W
• (1) X 6,000W

**4,000 watt and 6,000 watt heaters are dual element units and this control module allows independent control of each element, ultimately giving a Hi/Lo control.**