SunStar - SGL - Black Two Stage 24K-35K BTU Gas Heater with Control Choice Bundle

The SunStar GLASS heaters feature tinted high-temperature glass which provides protection on windy days and enhances the heater’s aesthetic appeal. The heater is constructed with weather-resistant, zinc-plated materials with enhanced black hi-temperature silicone powder-coated paint. It is specifically designed with internal reflectors to enhance the radiant output which is totally hidden behind the tinted ceramic glass. The SunStar GLASS delivers a radiant warmth directly to people at floor level first and then in the surrounding air. Unlike typical fire-based heaters which are affected by windy weather conditions that cause reduced heat output, the SunStar GLASS maintains consistent efficiency year around. The system has been tested and proven to operate in winds up to 40 miles per hour.

Additional Features/Benefits

• Two- Stage (high/low) models with a heating capacity of 24,000 – 35,000 BTU’s
• Available in Natural Gas or Liquid Propane.
• Aesthetically designed with glass front to blend with nearly any decor..
• Glass is wind resistant up to 40MPH..
• Chain Suspension or Wall/Ceiling Brackets (HORIZONTAL OR UP TO 60°).
• Heats up to a 12 x 12 Space.
• Ideal mounting height:
• Horizontal: 8-11ft.
• 5°- 30° Angle: 7-9ft.
• 31°- 60° Angle: 6.5-8ft.

• (1) Two-stage 24,000 – 34,000 BTU Heater .
• (1) 3 Position Switch (OFF | LO | HI).
• (1) 15” - 22” Telescopic Adjustable Mounting Kit from 0° - 60°.

• Standard controls and mounting brackets are included, but you can upgrade your kits.
• 3 Position Switch with remote- For those looking to control their heater with the use of a handheld remote control.
• Fixed Horizontal Mounting Kit – For those looking to install on ceiling facing straight down. Comes with a 10” drop down bracket and a heat shield.

• Two Stage Thermostat - Temperature range 50° to 90° F.
• Programmable Digital Thermostat - Temperature Range 40° to 90° F.
• Relay Kit - For controlling multiple heaters with a single 24V two-stage thermostat.
• Flex Connector – To connect heater to gas line.
• Column Bracket - Suitable for columns 8” and wider.
• 3 Inch Pole Bracket - For mounting on a 3 inch post.
• 4 Inch Pole Bracket - For mounting on a 4 inch post.