Destination Gear - Umbrellas - Custom Umbrellas - Custom Umbrellas

Push Button – A button typically located on the top half of the pole that lets you tilt the canopy.

Auto Tilt – The same crank or wheel used to open the canopy is also used to tilt the umbrella.

Collar Tilt – A collar located on the pole that can be twisted to tilt the shade.

Easy Tilt – A wheel located near the top of the pole tilts the canopy.

Rotational Tilt – Spin any rib clockwise to tilt the umbrella and counterclockwise to return the umbrella upright.

Manual Tilt – The umbrella is manually tilted sometimes with the use of a tool.

Crank Infinite Tilt – The umbrella can be tilted 360 degrees and in all directions.

Push-up – The collar of the umbrella is pushed up to open the canopy and locked in place, typically with a pin.

Crank – Turning a crank located in the center of the pole opens the canopy.

Pulley – A cord or rope is pulled to open the canopy and typically held in place with a pin.

Easy lift arm – This lift type is used on Galtech cantilever umbrellas. To open the canopy, grab the easy lift arm and lift up until it is locked in place.