Home Management System

What is Included with Purchase?

The Home Management panel is the only item you will need. The controlling of the units will all be done through your home automation system’s interface. This panel will require a 0-10v DC input signal.

How does it work?

The Home Management system gives you the convenience of controlling the intensity of heaters individually or grouping them in pairs to create “zones” through your home automation system. Depending on how many heaters are involved in your project, and their wattages, will determine how many relay’s you will need in your panel.

• Panels can be ordered with up to six relay’s per panel. Panels requiring over 6 relays are also available, please contact our sales team for custom pricing.
• Each relay in the panel can handle up to 9,000 watts at 240V and 8,000 watts at 208V. Wattage of the heaters in a relay must match and can not exceed the wattage limitations.
  Example: You can not mix a 4,000 watt heater and a 5,000 watt heater in the same relay because the wattages do not match
  Example: you can not mix (2) 5,000 watt heaters in the same relay because it will exceed the wattage limitations of 9,000 watts
• Whatever heaters are connected to a single relay will be controlled together.
  Example: if you have (2) 4,000 watt heaters in a single relay, both heaters will turn on and off and controlled up and down together.
• You can control up to three relays together.
  Example: If you have (3) 6,000 watt heaters, one heater per relay, you can control all three realy’s together through the home automation system, meaning they will all turn on and off and control up and down together.

Shop Home Management Systems