Pinterest Pixel

Sunpak - S34TSH - 25000 to 34000 BTU Two Stage Heater - Hardwired

Item # S34TSH Product Details  
Reg. $2,879.00 Save 10%
$2,591.10 On Sale
In Stock - Ships in 1 to 3 Days
  Free Shipping!
    Update  Cancel 
Select Finish Color  (Choose Your Finish Color)
Select Fuel Source
Natural Gas
Liquid Propane
Decrease Qty
Increase Qty

Need a Decor Plate?

Check Out These Mounting Accessories:

Have Product Questions?

SUNPAK S34 B TSH (#12042) has a two stage output 25,000 to 34,000 BTU controlled by a duplex switch with "ON-OFF-HIGH-LOW" capability. All SUNPAK heaters are CSA Design Certified and are equipped for clean burning, cost effective, and highly efficient natural gas or propane fuels.


  • Fully Automatic ON/OFF/HI/LOW control system.

  • Ceramic Infrared Burner System.

  • Direct Spark Ignition with Auto Re-light and Flame Sensor System.

  • Two Stage 25,00 to 34,000 BTU.

  • Hi-Temp Black Aluminized steel construction.

  • Black Mounting Kit Included.

  • 24 Volt Transformer Included.

  • Sunpak Duplex Switch Control Included.

  • Wall or Ceiling mount.

  • 9' 1/2" to 12' Mounting Height.

  • Approximate 12 ' x 12' Heat Coverage @ 34,000 BTU (High Setting).

  • Approximate 10' x 10' Heat Coverage @ 25,000 BTU (Low Setting).

  • Recommended for Commercial and Residential Installation.

  • Available in natural gas or liquid propane.

  • Made in the USA.

More about this product

SUNPAK S34 TSH has a two stage output 25,000 to 34,000 BTU controlled by a duplex switch with "ON-OFF-HIGH-LOW" capability. All SUNPAK heaters are CSA Design Certified and are equipped for clean burning, cost effective, and highly efficient natural gas or propane fuels.

Features and Specs:

  • Fully Automatic ON/OFF/HI/LOW control system
  • Ceramic Infrared Burner System
  • Direct Spark Ignition with Auto Re-light and Flame Sensor System
  • Two Stage 34,000 to 25,000 BTU
  • 304 Series stainless steel construction
  • Stainless Steel Mounting Kit Included
  • 24 Volt Transformer Included
  • Sunpak® Duplex Switch Control Included
  • Wall or Ceiling mount
  • Minimum Mounting Height: Horizontal mount- 9’, 30° Tilt Mount – 8’
  • Approximate 12 foot x 12 foot Heat Coverage @ 34,000 BTU (High Setting)
  • Approxiamte 10 foot x 10 foot Heat Coverage @ 25,000 BTU (Low Setting)
  • Recommended for Commercial and Residential Installation
  • Comes with 18" mounting brackets to meet minimum clearance requirements
  • Available in natural gas or liquid propane
  • Comes with 18" mounting brackets to meet minimum clearance requirements
  • Black unit is made of Aluminized Steel, Stainless unit is made of 304 Stainless Steel
  • Made in the USA

  • Fascia Kits:
    Decorative fascia trims are sold separately and available in either black or stainless steel to enhance the look of your Sunpak heater.
    Effective Heated Area

    Sunpak Trims
    Effective Heated Area

    Sunpak Trims


    Sunpak heaters are unvented need a continuous supply of fresh air and proper ventilation to operate safely. This heater is not to be used inside residences and other confined areas where the operational and safety requirements of this heater cannot be met.

    To learn more about which Sunpak heater is right for your space, check out our Sunpak buying guide
    Clearances

    Clearances

    Dimensions & Weights
    Length:
    48"
    Height:
    8"
    Depth/Extension:
    8"
    Heating Specifications
    Heating Area:
    144 Sq. Ft.
    Fuel Source:
    Liquid Propane, Natural Gas
    Ignition Type:
    Direct Spark
    Heat Rating (BTU):
    34000 BTU/Hour
    Installation Details
    Minimum Mounting Height:
    96"
    Product Details
    Finish:
    Black, Stainless Steel
    Voltage Rating:
    24 V
    Body Material:
    Steel
    Mounting Options:
    Wall Mount
    Emitter Material:
    Ceramic
    Reflector Material:
    Aluminum
    Warranty:
    Lifetime Warranty
    What is Included
    Mounting Brackets Included:
    Yes
    Referral Code 0